Close nav

26' Lobster Boat Molds For Sale

  • Type of Boat: Power Boat
  • Model: Lobster boat 26'
  • Make: --
  • Year: 2018
  • Length: 26
  • Beam: 9.5
  • Draft: 3.1
  • Hull Type: Fibreglass
  • Number of Engines: 1
  • Horsepower: 180
  • Estimated Running Hours: 1
  • Fuel Type: Diesel
  • Fuel Capacity: 450
  • Total Passenger Capacity: 8
  • Number Of Berths / Sleeps: 2
  • Condidtion: Excellent

Ad Description

MOLDS FOR 26' LOBSTER BOAT FOR SALE

These high quality molds are for a popular US designed Maine style 26' Lobster Boat now up for sale by the original boat builder and still current owner.

Six boats were built, some exported which is a resounding endorsement by the export market of the quality of the molds that produced them. The molds were built under qualified New Zealand boat builder supervision.

This is a dependable shaft driven, single screw, diesel engine, hard chine semi-displacement design. Capable of moderate speeds up to 15 knots with 180 hp diesel motor. This boat has often been referred to as a go far boat with uncomplicated pre-commonrail era systems that can be repaired using simple tools and a grasp of basic mechanical knowledge. A real KISS (Keep It Simple Stupid) concept!

Offered at just a fraction of the cost it would take to reproduce molds of this quality in today's money.

The full set of tooling / molds includes as follows;
• Hull Mold (split type)
• Main Deck Mold (with molded-in non-skid pattern throughout)
• Cockpit Hatch Cover Molds (1 set)
• Cabin Top / Coach house Sub-mold set
• Aft Swim Platform Mold (also with molded-in non-skid pattern)
• Engine Cover Mold
• Fuel tank molds (port and starboard pair)
• Water tank mold (one mold for port and starboard)
• Console mold

Another very low risk business opportunity possibility:- the manufacture of hull, deck and components as kits for resale also a possibility. This type of design would be perfect for many people wanting to build a boat in this size range but are also on a budget. A great low cost entry level proven design for many aspiring boat owners with dozens of plywood versions built in the US alone through the years by both amateur and professional boat builders alike and a testament to their market value.

The molds have been stored under a boat yard roof their entire life and therefore all still in very good condition ready for cut and polish to begin laying up boats again.

Reason for selling: This company has now moved on to more modern production and techniques for export only and now both the boat yard and site needs to be cleared for new business ventures.

Price for full set of tooling / molds = Thai Baht 400,000 o.n.o. - and serious offers only please!

Can assist with transport arrangements if required.

For appointment to view the molds please contact Miss Sucheela on Mob # 089 074 0257 or e-mail pmar1@bkk3.loxinfo.co.th
Similar ads
Yacht Partner wanted, Ferretti 53 ft Flybridge,  Pattaya Ocean Marina

Yacht Partner wanted, Ferretti 53 ft Flybridge, Pattaya Ocean Marina

  • 07 May 2019 : 09:43 am

I am looking for a 50 % Boat-partner to share this beautiful Ferretti Yacht. I dont use it enough but I dont really want to sell it... Thats why I offer 50 % of it for a partner.... Very good condition, nice berth in Ocean Marina, total cost per month only 1.000.- USD, so shared cost 50 % is about 16.000 THB per partner per month. ( that includes berthing, insurance and weekly cleaning service by the boat boy) Lets talk if you are interested...

Yamaha 232 Limited S

Yamaha 232 Limited S

  • 23 May 2019 : 10:23 am

The 232 Limited S is as good looking as she is functional and feature a freshwater transom shower, premium vinyl upholstery, snap-in cockpit carpet, wood grain dash trim, and stainless steel cup holders. The one feature that really sets these Yamaha boats apart from crowd is the design of the stern area, arranged on two levels; the aft platform extends more than four feet forward from the rear of the boat. The vertical surfaces surrounding the upper platform are curved and padded to act as a back rest. The platform surfaces are covered in soft HydroTurf material that's easy on the feet and knees. There's a compartment for wet gear stowage in the upper level, while the lower level has a pedestal socket for a small table. Use the built-in stereo remote to crank up the tunes, lean back, and you've got a waterfront patio. It's the perfect perch for a family with kids who like to swim off the back of the boat, whether anchored or beached.

Larson Cabrio 310

Larson Cabrio 310

  • 23 May 2019 : 10:24 am

The Cabrio 310 has a wide beam of 10' 6" but feels even larger due to the design of its boarding platform. The Duo-delta Conic hull creates faster speeds with less horsepower than traditional deep-vee cruisers. It has wrap around cockpit seating with a table, lounger seat & double wide helm bench seat. Cockpit sink/wet bar with ice maker, full camper canvas with walk-thru windshield w/foredeck sunpad. Oversized swim platform with trunk storage locker, generator & AC. Great looking sports cruiser with twin 5.7 L Volvo engines generating a good turn of speed. One owner since new, high & dry stored since new! Beautiful condition