Fuji Fujifilm X70 Digital Wi-Fi Camera with Fujinon 18.5mm f/2.8 Lens

Made in Japan. S/n: last photo. Excellent condition. Compatible with: Micro Four Thirds Cameras, m4/3, Olympus, Matsushita (Panasonic, Lumix), DJI Zenmuse X5, Olympus Air, Kodak Pixpro S-1, Xiaomi YI M1 cameras, Blackmagic Cinema, Blackmagic Pocket Cinema Camera 4K, Z Camera E1, JVC GY-LS300 Video Cameras. Lens with two caps, User Manual, Lumix Pouch, Box. EMS 50 baht, Cash on Delivery Available (COD เก็บเงินปลายทางได้) or meeting in North Pattaya. More photos and questions via Line ID: gnnick ใช้กับกล้อง Mount m4/3 โครงสร้างเลนส์ 9 ชิ้น 7 กลุ่ม โฟกัสใกล้สุด 30 ซม. หน้าเลนส์ขนาด 46 มม. ขนาด 63 x 54.5 มม. น้ำหนัก 200 กรัม Panasonic LUMIX G Micro 4/3 LEICA DG SUMMILUX 25mm f1.4 ASPH. Lens H-X025 Lumix G Micro 4/3 LEICA DG SUMMILUX 25mm f1.4 ASPH. Lens is designed for use with Lumix G Micro 4/3 cameras. It provides an angle of view similar to a 50mm lens on a 35mm or full-frame digital camera, and the wide f/1.4 maximum aperture can deliver beautiful, bright photos and videos with softly out-of-focus backgrounds. Built to Leica’s usual high standards, this lens delivers excellent image quality with minimal distortion or chromatic aberrations, with a sturdy metal mount. Nano Surface Coating minimizes reflection over the entire visual light range, resulting in sharp, clear images with very little ghost and flare. The use of the Ultra High Refractive index lens and glass mold aspherical elements helps the lens maintain superb uniformity edge to edge. Seven aperture blades form a circular aperture for very pleasing out-of-focus areas in your images. MTF Chart Lens Construction Lens Construction 9 elements in 7 groups (2 aspherical lenses , 1 UHR(Ultra High Refractive Index)Lens ) Nano Surface Coating Yes Mount Micro Four Thirds mount Optical Image Stabilizer No Focal Length f=25mm (35mm camera equivalent 50mm) Aperture Type 7 diaphragm blades / Circular aperture diaphragm Aperture F1.4 Minimum Aperture F16 Closest Focusing Distance 0.3m / 0.98ft Maximum Magnification Approx. 0.11x / 0.22x (35mm camera equivalent) Diagonal Angle of View 47? Filter Size  46mm / 1.81in Max. Diameter ?63mm / 2.48in Overall Length Approx. 54.5mm (from the tip of the lens to the base side of the lens mount) / 2.14in Weight Approx. 200g / Standard Accessories Lens cap, Lens rear cap, Lens storage bag

Fully tested in mint condition. Lens with two caps and original hood. S/n: last photo. EMS 50 baht, Cash on Delivery Available (COD เก็บเงินปลายทางได้) or meeting in North Pattaya. More photos and questions via Line ID: gnnick A compact standard zoom lens that’s anything but standard The 18-55mm zoom lens is the perfect companion for any Samsung compact system camera. Made for use in all general conditions, this all-round lens helps you create beautiful portraits, amazing landscapes and everything in between. Its small, lightweight design offers excellent portability; travel anywhere without feeling weighed down by camera equipment. And thanks to this entry-level lens’ ease-of-use, you’ll get professional results — even if you’re an amateur shutterbug. A revolutionary, new type of camera calls for a lens design equally as cutting-edge, such as the lightweight 18-55mm zoom lens. Optimised for Samsung’s compact system cameras, its quick and accurate contrast AF (Auto Focus) focuses in an incredible approx. 170ms* (0.17 seconds). Now you can capture even the most spontaneous moments in astonishing detail, and turn unexpected, had-to-be-there moments into memories of a lifetime. (Tested under Samsung's standard conditions and may vary depending on camera firmware and camera settings) . Create beautiful images that move you, even if you jostle the camera. The 18-55mm zoom lens comes equipped with lens-shift optical image-stabilising technology. Samsung’s optical image stabiliser uses tiny lens-shifts to cancel out motion blur, even in low exposure shots. And since the image is being stabilised externally in the lens, what you see through the viewfinder — and on the display — is perfectly clear.

Shutter counter: 351! Used, but in very good working condition. Cosmetically, it has a lot of traces and scratches on body (!) that don't affect quality of photos. Include: Body Body cap Eye shield Hot shoe cover Li-ion battery AC power adapter Shoulder strap Metal strap clips Protective covers English / Thai menu. Brand : OLYMPUS Serial number : Last photo Camera mount : For Micro Four Thirds Display Language : Language settings can be selected from a total of 34 languages, including English and Thai. Camera mount : Micro Four Thirds EMS 50 baht, Cash on Delivery Available (COD เก็บเงินปลายทางได้) or meeting in North Pattaya. More photos and questions via Line ID: gnnick The VCM 5-axis image stabilization system has been optimized for optimal stabilization. Regardless of the form of vibration Not only the world's most efficient * 1 That can compensate shutter speeds up to 5 Steps in still photography. But has better video recording performance Splash and dust proof construction That are recognized and accepted From many professional photographers And now has increased the ability to withstand cold weather To provide greater confidence and confidence for use in harsh environments Inside this compact body It's unbelievable to be packed with the latest technology, including OM-D Movie, to deliver cinema-like quality. Video shooting with a hand-held interchangeable lens camera and the world's shortest shooting time-lag * 2 With the use of high speed autofocus system In addition, the firmware upgrade To add the latest functionality And better performance to make the E-M5 Mark II even more perfect. With excellent maneuverability and remarkably high efficiency Features added in firmware version 4.0 upgrade

Made in Japan. S/n: last photo. Adapter, Body Cap BF-1B, Rear Lens Cap LF-N1000. Fully tested in excellent working condition. 100% workable. Cosmetically, it may have some traces and scratches on body (look at photos) that don't affect quality of photos. EMS 50 baht, Cash on Delivery Available (COD เก็บเงินปลายทางได้) or meeting in North Pattaya. More photos and questions via Line ID: gnnick FT1 Firmware: https://downloadcenter.nikonimglib.com/en/download/fw/102.html Key Features The FT1 mount adapter allows NIKKOR F mount lenses to be used with Nikon 1 cameras equipped with a Nikon 1 mount. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35mm format lens with a focal length about 2.7 x longer. The FT1 can be used with more than 80 lenses, representing almost all the NIKKOR lenses currently on the market(*1). It almost goes without saying that it also supports autoexposure/autofocus(*2) and vibration reduction(*3). Electronic rangefinding is available in manual focus mode.You can also explore the new forms of expression offered by the Nikon 1's unique Motion Snapshot mode(*4). *1DX-format F-mount NIKKOR lenses can also be used with the FT1 mount adapter. IX-NIKKOR lenses, AF lenses for the F3AF, non-AI lenses, teleconverters, and auto extension rings cannot be used. *2Autofocus is available only with AF-S, AF-P lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the camera will not focus in other autofocus modes). The only AF-area mode available is Single-point AF and the camera focuses on the subject in the center focus point only. *3Available with VR lenses. Vibration reduction is always ON when shooting with a VR lens that has no Vibration reduction ON/OFF switch. *4Motion Snapshots can be recorded only when an AF-S or AF-P lens is attached and AF-S (Single AF) is selected for focus mode and then only when the camera is in focus. Available only when autofocus is used with AF-S lenses. Specifications Type Mount adapter Supported cameras Nikon 1 interchangeable lens format digital cameras (Nikon 1 V1 supported from firmware version A 1.10/B 1.10, Nikon 1 J1 from firmware version A 1.10/B 1.10) Dimensions Approx. 61.5 mm diameter (excluding projections) x 42.5 mm Weight Approx. 150 g/5.3 oz Supplied Accessories Body Cap BF-1B Rear Lens Cap LF-N1000 Compatible Accessories Lens Soft Case CL-N101 Product description The FT1 Mount Adapter allows you to use certain legacy F Mount NIKKOR lenses (those designed for use with Nikon D-SLR/SLR cameras) on the Nikon 1 V1. The Mount Adapter is attached to the Nikon 1 V1 and the F Mount NIKKOR lens then attached to the adapter. The FT1 will add an angle of view of 2.7 times that of the F Mount NIKKOR lens' focal length.FEATURES: To use the FT-1, the Nikon 1 J1/V1 camera's firmware must be updated to at least version 1.10. F mount lenses mounted on the FT-1 have a crop factor of 2.7×. Enjoy an angle of view equivalent to that of a super telephoto lens when a telephoto lens is used. (Example: When using a 300mm lens, the equivalent angle of view is that of an 800mm lens.) When using the FT-1 and a compatible AF-S NIKKOR F-Mount lens, users can take full advantage of the Nikon 1's high-speed continuous shooting of 10/30/60 fps. (*When an AF-S lens is used. However, focus is locked with the first shot with continuous shooting.) [P], [S], [A], and [M] exposure modes can be used with CPU lenses. Vibration reduction (VR) functions when VR lenses are used. Enable vibration reduction, or specify a setting, using switches on the lens. NORMAL/ACTIVE modes are supported when lenses equipped with these modes are used. VR functions in NORMAL mode when lenses not equipped with the NORMAL/ACTIVE modes are used. The Smart Photo Selector function cannot be used. Supports 65 existing F-mount NIKKOR lenses AF/AE supported with AF-S lenses only. Autofocusing is possible when AF-S lenses are used. However, focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point with only the center focus point used. The focus indicator (rangefinder) can be used with CPU lenses. [A] and [M] exposure modes can be used with non-CPU lenses. Aperture is specifie The Nikon FT1 Mount Adapter allows you to use certain Nikkor F-mount lenses (designed for Nikon SLR and DSLR cameras) on all Nikon 1 mirrorless cameras. In order to use this adapter, the camera's firmware must be updated to at least version 1.10. An F-mount lens will produce an angle of view equivalent to 2.7x the view when used with a full-frame SLR or DSLR camera (an F-mount 50mm lens, for instance, will provide an angle of view on the V1 equivalent to a 135mm lens on a full-frame SLR or DSLR camera). When a VR (Vibration Reduction) lens is used, VR functions can be used. Autofocusing is possible when using AF-S lenses, but focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point, using only the center focus point. AF/AE supported with AF-S lenses only. When using CPU lenses, [P], [S], [A], and [M] exposure modes can be used, while only [A] and [M] exposure modes can be used with non-CPU lenses. The aperture is set using the aperture ring on the lens. Shooting in Motion Snapshot mode is only possible when focus has been acquired with an AF-S lens. The Smart Photo Selector function cannot be used. As of December, 2011, the FT1 Adapter is compatible with 65 existing F-mount Nikkor lenses. Use Nikkor F-mount lens with Nikon 1 cameras. For Nikon 1 cameras--the camera's firmware must be updated to at least version 1.10. When using the FT-1 and a compatible AF-S NIKKOR F-Mount lens, users can take full advantage of the Nikon 1's high-speed continuous shooting of 10/30/60 fps. (*When an AF-S lens is used. However, focus is locked with the first shot with continuous shooting.) [P], [S], [A], and [M] exposure modes can be used with CPU lenses. Vibration reduction (VR) functions when VR lenses are used. Enable vibration reduction, or specify a setting, using switches on the lens. NORMAL/ACTIVE modes are supported when lenses equipped with these modes are used. VR functions in NORMAL mode when lenses not equipped with the NORMAL/ACTIVE modes are used. The Smart Photo Selector function cannot be used. AF/AE supported with AF-S lenses only. Autofocusing is possible when AF-S lenses are used. However, focus mode must be set to AF-S (Single AF) and AF-area mode is fixed at Single-point with only the center focus point used. The focus indicator (rangefinder) can be used with CPU lenses. [A] and [M] exposure modes can be used with non-CPU lenses. Aperture is specified using the aperture ring on the lens. Shooting in Motion Snapshot mode is only possible when focus has been acquired with an AF-S lens. https://imaging.nikon.com/lineup/acil/lenses/mount_adapter_ft1/