Close nav


Ad Description


Very versatile due to the TRONICAL self tuning Robotsystem. It allows you to store 6 different tunings. Hard to come by 2008 limited edition. Battery update to an 5200 mHa pack. Aftermarket plain 3-ply black pickguard - original carbon look pickguard inc.

Beautiful silverburst finish and for an 11 year old guitar in very good condition. Must see! Comes complete with paperwork, manual and charger.

Headstock binding and ebony fretboard. Very low action and super comfortable to play. As you might know, the SG is a very versatile guitar and fits in every style of music.

If you need more information or additional pictures simply drop me a mail.

The Robot Guitar invasion continues! Gibson’s 12-7-07 launch of the Limited Edition Robot Guitar redefined the power and possibility of a guitar to capture the imagination of players all around the world. Gibson is now proud to answer the demands of thousands who wanted another chance at owning the ground-breaking technology with the introduction of the Robot SG, which combines with classic styling, performance, and power of the legendary SG with the revolutionary Robot Tuning System. Offering a standard EADGBE tuning preset, and six additional, totally programmable tuning presets, the Robot SG with Robot Tuning System allows players to change tunings in seconds—all at the touch of a button. Additionally, the Robot SG features a performance-safeguarding Neutrik jack, which secures the cord into the guitar.

Powerhead Locking Tuners
Gibson’s revolutionary Robot Les Paul Studio Limited is unique in many ways, but the “robot-like” Powerhead Tuners that grace the headstock are extraordinary. Pull out the Robot Les Paul Studio Limited’s Multi-Control Knob (MCK) and watch the Powerhead Tuners spring into action. It takes only a few seconds for the Powerhead Tuners to tune the Robot Les Paul Studio Limited to the desired tuning. Each tuning peg is equipped with a tiny, but powerful, servo motor that kicks into action once the system is activated. The Powerhead Tuners rely on the strings themselves to send the signals, eliminating any potential for interference. Made of lightweight metal with a satin nickel finish, the Powerhead Tuners weigh only 46.5 grams each. A standard Gotoh tuner weighs in at 49 grams. That means a set of Powerhead Tuners weigh a full 15 grams less than a set of Gotoh tuners, which is another indicator of the Robot Les Paul Studio Limited’s true innovation.

’50s Rounded Neck Profile
No guitar neck profile is more distinguishable than the neck profile employed on Gibson’s revolutionary Robot Les Paul Studio Limited—the traditional ’50s neck, which is the thicker, rounder profile, emulating the neck shapes found on the iconic 1958 and 1959 Les Paul Standards. Each neck is machined in Gibson’s rough mill using wood shapers to make the initial cuts. Once the fingerboard gets glued on, neck is carefully shaped by hand. That means there are no two necks with the exact same dimensions. True to its handcrafting, each neck will be slightly different, with a distinct and traditional feel.

22-Fret Ebony Fingerboard
Ebony has always graced the fingerboards of the world’s finest stringed instruments, including today’s Les Paul Custom, Les Paul Supreme, and the pioneering HD.6X-Pro Digital Les Paul. The fingerboard on Gibson’s revolutionary Robot Les Paul Studio Limited is constructed from the highest grade Ebony on the planet. The ebony is personally inspected and qualified by Gibson’s team of skilled wood experts before it enters the Gibson factories to be fitted onto the necks of the new Robot Les Paul Studio Limited guitars. The resilience of this dense and durable wood makes the fingerboard extremely balanced and stable, and gives each chord and note clarity and bite. The 12-inch radius of the fingerboard provides smooth note bending capabilities and eliminates “dead” or “choked out” notes, which can occur on fingerboards with lesser radiuses. Resilient and less porous, ebony tends to absorb oils well, which allows it to preserve its rich, beautiful color.

Fret Wire
The fret wire on the revolutionary Robot SG Special Limited is a combination nickel and silver alloy (approximately 80 percent nickel and 20 percent silver) specifically designed for long life and superior wear. Gibson’s traditional “medium/jumbo” fret wire is first shaped by hand, then cut to an exact 12-inch radius. After hand pressing it into the fingerboard, a machine press finishes the job to eliminate the gap between the bottom of the fret wire and the fingerboard.

Nitrocellulose Finishes
Applying this nitro finish to any Gibson guitar—including the revolutionary Robot SG Special Limited—is one of the most labor-intensive elements of the guitar-making process. A properly applied nitro finish requires extensive man hours, several evenly applied coats, and an exorbitant amount of drying time. But this fact has never swayed Gibson into changing this time-tested method that has been employed ever since the first Gibson guitar was swathed with lacquer back in 1894. Why? For starters, a nitro finish dries to a much thinner coat than a polyurethane finish, which means there is less interference with the natural vibration of the instrument, allowing for a purer tone. A nitro finish is also a softer finish, which makes it easily repairable. You can touch up a scratch or ding on a nitro finish, but you can’t do the same on a poly finish. In addition, a nitro finish is very porous in nature, and actually gets thinner over time. It does not “seal” wood in an airtight shell—as a poly finish does—and allows the wood to breathe and age properly.

Gibson’s 490R and 498T Pickups
The mid to late 1960s saw the emergence of a very different type of music coming from the clubs of England. This new genre’s players were demanding more powerful amplifiers with increased volume outputs to satisfy their sonic explorations. This led to a call for a more versatile pickup to split coils through a push/pull knob, and prevent the microphonic feedback that occurs when the volume is turned up to maximum levels. Gibson answered this call with the 490T and 490R pickups (“T” for treble, and “R” for rhythm), both with the traditional characteristics of the original “Patent Applied For” pickups, but with two key modifications. First, a four-conductor wiring scheme allows the 490s to be connected to any push/pull knob, which lets players split the coils and increase versatility. Gibson also introduced wax potting, which does away with any air space inside the pickup—thus lessening the chances of microphonic feedback. The result is a humbucker with the tonal characteristics of an original PAF, with a slight increase in upper mid-range response. The Gibson 498T bridge pickup is the 490’s ideal complement. Taking the 490 one step further, the 498 swaps the Alnico II magnet to an Alnico V, thus making it slightly hotter with emphasis on mid-ranges and highs. The pole pieces on the 498T are also aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck.

Solid Mahogany Body
A slim, solid mahogany body is fundamental to all SGs. The Robot SG Special Limited’s light body delivers the SG’s legendary thick, warm tone and singing sustain. The mahogany is personally inspected and qualified by Gibson’s team of skilled wood experts. Once inside the Gibson factories—where humidity is maintained at 45 percent, and the temperature at 70 degrees—all woods are dried to a level of “equilibrium” by ensuring the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, and helps control the shrinkage and warping of the woods, in addition to helping reduce the weight. It also helps with improving the woods’ machinability and finishing properties, and adherence to glue. Consistent moisture content means that a Gibson guitar will respond evenly to temperature and humidity changes long after it leaves the factory.

At the heart of Gibson’s revolutionary Robot SG Special Limited are its ground-breaking controls. At first glance, the four control knobs seem to be indistinguishable from those on any other SG. But look again. While the four knobs do provide the standard tone and volume controls for each of the two pickups, the Multi-Control Knob (MCK)—the one with the illuminated top—serves as the master control for all aspects of the Robot SG Special Limited’s amazing, self-tuning system. The MCK is what is commonly referred to as a “push-pull” knob. When in the normal position (down), it behaves as a regular volume or tone pot. When the MCK is pulled out, the Robot SG Special Limited’s radically new self-tuning system is activated and ready for use. It immediately places the Robot SG Special Limited in standard tuning mode (A440). A quick turn of the MCK presents six factory presets, all of which can be customized. At any time, you can also restore the tunings to the factory presets and start all over again. The LED display on top of the MCK also lets you know when a string is out of tune, or when all strings are in tune, and even when the tuners are turning to get them in tune. It even guides the setting of accurate intonation. At the end of the tuning process, the blue lights on top of the MCK flash. Push the MCK back in and it’s ready to go. The only thing you have to do is play.

Tune-Control Bridge and Data Transmitting Tailpiece
The revolutionary Robot SG Special Limited sports a new and unique, highly specialized Tune Control Bridge which acts as one of the main components of the self-tuning robotic system. The new Tune-Control Bridge is a modified Tune-o-matic that measures the individual tuning of each string via special saddles. The signal from each string is then transmitted to the control CPU in the control panel, which then transfers the signal to the Neck CPU and the Powerhead Locking Tuners, which, in turn, tune the strings. At first glance, the tailpiece on Gibson’s ground-breaking Robot SG Special Limited looks like a normal tailpiece. But look a little closer and you’ll see that it’s far from ordinary. Gibson’s new Data Transmitting Tailpiece is a hub of activity. First, each string is separated by ceramic insulators that isolate each individual string signal and avoids confusion as to which string is being processed and tuned. There are also special isolating inserts that keep the ball ends commonly found on electric guitar strings from making contact and disrupting signal flow. Underneath the tailpiece is a tiny circuit board that processes each individual signal to the ribbon cable, which is then transmitted to the on-board CPUs, which, in turn, tune the strings. Both pieces work with each other to help balance all the information being transmitted between the various points, and make sure every string is in tune.

Neutrik Jack
Neutrik has been making superior electronic interconnection products since 1975, making them the logical choice to supply the performance safeguarding jack in Gibson’s revolutionary Robot SG Special Limited. Like many Neutrik products, the jack in the Robot SG Special Limited is manufactured from strong, high-grade thermoplastics and housed in a rugged diecast nickel shell. A retention spring inside the jack ensures optimum grip on any guitar cable, thus avoiding the chance of lost connection.

Final Price 34,500THB - check out the international availability and prices and you will see it is a steal!

If you need more information or more pictures of this beauty simply drop me a mail.

Similar ads


  • 19 Feb 2020 : 20:49 pm

17000 February 2020 - unless Ive spoken to you already. Will consider offers as UK pound currency fairly low. YAMAHA STAGEPAS 300 sound system- WITH STANDS and STAND ADAPTORS-which are normally extra purchased accessories New version on LAZADA- cost 34000 - -without stands and less effects The iconic PA System from Yamaha - fantastic clear sound with various effects for voice and instruments - 4/8 channels for microphone - guitar - music imput. Very easy and quick to set up - lightweight for transport. Can use in venues say up to 200/300 people - restaurant - bar - small club LINE - ID - Garyguitar Gary - 0890007620 (Second picture is new version)

Cobran FA-1 guitar, made in the Jackson factory in Japan in 1995

Cobran FA-1 guitar, made in the Jackson factory in Japan in 1995

  • 22 Feb 2020 : 11:57 am

COBRAN FA-1 Vintage c1995 out of the Jackson factory in Japan. This very nice, made in Japan, Jackson-like super-Strat was bought by me when I needed a good working guitar to do some gigs. The things I wanted were a solid body, 3 pick-up configuration with a 25.5” scale length, nice big frets and good quality machine heads. This Cobran FA-1 ticked all the boxes. Soon after I bought it I decided that a better sound was called for from the bridge pick-up; the other two pick-ups were fine as I tended to just require a knock-em-dead bridge pick-up sound for soloing. I went to famous luthier Mr. Mike in Pattaya and he suggested an old DiMarzio PAF humbucker, which was a direct replacement. I had him fit a bone nut and do some work on the frets and set the neck up while I was there, because although the guitar was good enough, I wanted it to be the best it could be. I changed the knobs for a pair of white speed knobs; it was a go-faster-stripe exercise, but they do set off the blue colour well! ONLY 7,000 Baht. Please message me on Messenger or Facebook.