ปิดNAV

Track end stops - Sail / Jib

รายละเอียดของโฆษณา

T Track end stops 32mm
Lewmar part No.29172016
Pair , as new in packaging
Will fit most brands 32mm T track
500 baht each or 900 baht pair
โฆษณาทีเหมือนกัน
Generator - Shore Power change over switch 600Vac 65 A (reduced again)

Generator - Shore Power change over switch 600Vac 65 A (reduced again)

  • 17 Feb 2024 : 17:32 pm

Heavy duty Generator - Shore Power changeover switch . Made in AUSTRIA by Kraus and Naimer C42 65A , 600Vac Universal Rotary Changeover Switch SZW26-63 600V 65A 3 Position Switch Type Rotary Switch Operation Mode ON-OFF-ON Terminal Screw Material Plastic Mounting Type Panel Mount Actuator Type Rotary Operating Voltage 600 Volts Connector Type Screw AC Rotary Switch – OFF + 2 Positions 600V AC 65A Amp 65 Amp AC Sources 2 AC Sources Max Volts 600V Cable dimensions 12 – 6 AWG Width x Height 64 mm x 64 mm Depth 62 mm Approvals CE, UL ( sold by Blue Sea Systems Shore Power / Generator Selector Switch) • Switches 2 - 120 or 230 Volt AC sources. • Compact solution when circuit protection is provided elsewhere. • Allows connecting one of two different AC sources to one circuit. • Mounts in panels up to 0.16” (4.00mm) thick. • Heavy duty industrial rated switch. • Intuitive function - One hand operation. • UL listed. • Switches 120 or 230 Volt AC sources. • 600 Volt AC max. • Compact solution when circuit protection is provided elsewhere. • Allows connecting one of several AC sources to one circuit. • Mounts in panels up to 0.16” (4.00mm) thick. • Heavy duty industrial rated switch. • Intuitive function - one hand operation. 386341 Blue Sea Systems Shore Power / Generator Selector Switch - 9019 - 65 Amp 2 Position Switch US$389.99 ( Thai Baht 12000 (excluding shipping/tax) This is not from China ! New and unused, now 5000 baht ( less than half price )

Marine engine exhaust anti-siphon loop device (new)

Marine engine exhaust anti-siphon loop device (new)

  • 01 Mar 2024 : 22:46 pm

Exhaust anti-siphon loop and breaker valve kit supplied with hose tails for a complete hose line anti-siphon installation. This kit is supplied with the following parts to create a working anti-siphon device: 1 x brass loop with two 3/4" BSPF ports and one 1/2" BSPF port (410014) 1 x brass siphon valve with one 1/2" BSPM and one 3/8" BSPF port (410043) 2 x brass 3/4" BSPM to 19mm hose tails (404045) Once assembled, these give a complete anti-siphon device suitable for 19mm hose lines and a 10mm vent hose. This will only allow water to flow in the intended direction and will create a vacuum if the flow is reversed. Typical installations for an anti-siphon device are sea water intakes, exhaust injection lines and toilet systems where the equipment installed is below the waterline. Hose Tail Size 19mm / 3/4" Country of Origin Italy With Valve Yes Construction Brass bend and hosetails. Valve is brass with a rubber valve Hose Size Suits ID: 19mm (3/4") (with (3/8") connection for vent line) Solid brass 2500 baht each ( one sold ,one available )