Exhaust anti-siphon loop and breaker valve kit supplied with hose tails for a complete hose line anti-siphon installation. This kit is supplied with the following parts to create a working anti-siphon device:
1 x brass loop with two 3/4" BSPF ports and one 1/2" BSPF port (410014)
1 x brass siphon valve with one 1/2" BSPM and one 3/8" BSPF port (410043)
2 x brass 3/4" BSPM to 19mm hose tails (404045)
Once assembled, these give a complete anti-siphon device suitable for 19mm hose lines and a 10mm vent hose. This will only allow water to flow in the intended direction and will create a vacuum if the flow is reversed. Typical installations for an anti-siphon device are sea water intakes, exhaust injection lines and toilet systems where the equipment installed is below the waterline.
Hose Tail Size 19mm / 3/4"
Country of Origin Italy
With Valve Yes
Construction Brass bend and hosetails. Valve is brass with a rubber valve
Hose Size Suits ID: 19mm (3/4") (with (3/8") connection for vent line)
Solid brass 2500 baht each ( new and unused )